2003 Acura RSX Fog Lights Installation

This 2003 AcuraRSX fog lights installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.”

Content Inside:
1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the preset buttons.
2. Disconnect the negative cable from the battery
3. Using scissors, cut out the templates. Fold both small templates as shown.
4. Position the large left template on the left bumper grille, and tape it in position using masking tape.
5. Using a pushpin, make a hole through each of the three marks indicated on the template
6. Using a utility knife, score the bumper along the heavy line in the area shown. Remove the large template from the bumper.
7. Insert the two tabs of the small left template into the slits in the front bumper. Using a pushpin, make a hole through each of the two marks indicated on the template.
8. Remove the small template from the bumper. Using a 3 mm, 5 mm, and a 10 mm drill bit, drill a hole through each of the five marks.

2003 AcuraRSX Fog Lights Installation
Source: http://kingkevindesigns.com/